This tutorial is a very comprehensive step by step approch to learning Mastercam Mill Version 9. Approximately 500 pages of parts projects, helpful hints, as well as tool and material library instructions. Fourteen parts projects in all, and an additional 19 dimensioned drawing for review and practice. This manual also comes equipped with the digital Mastercam Mill Training Tutorial V9 CD. These materials cover 2D and 3D Geometry Creation, Drilling, Tapping, Contouring and Pocketing. They also contain information on 3D Surface Machining Toolpaths for Roughing and Finishing and deal with Pockets, Parallel, Contour, Radial, Plunge, Flowline, Scallop, and Leftover. They describe Stock Setup and Tool Parameters. Each tutorial walks you right through from Geometry Creation to Toolpath instructions, Verification and G-Code generation. Also includes the Design features as described in the Design Tutorial outline.