| |
|
|
|
|
|
| Mastercam Solids Training Tutorial X4 |
The Mastercam X4 Solids Training Tutorial offers concise, step-by-step instructions on creating 3D wireframe and solid geometry. Six Tutorials illustrate a variety of useful solid commands. Topics covered include Extrude, Revolve, Sweep and Boolean. This book also demonstrates creating solid geometry from surfaces, using loft commands, shell, chamfer and fillet features.
. |
$35.00 |
| ProBookShelf Mastercam
X4 Price
: $33.00 |
|
|
|
|
|
| |
|
|
 |
|
| |
|
|
|
|
|
| Mastercam Mill Level 1 Training Tutorial X4 |
The Mastercam X4 Mill Level 1 Training Tutorial puts a greater emphasis on the machinability of parts by offering suggested fixtures, setup sheets, recommended tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 10 included tutorials. Additionally, 17 practice exercises and a General Notes chapter provide useful tools, shortcuts and 2D toolpath parameter descriptions that round out this 700+ page book
. |
$65.00 |
| ProBookShelf Mastercam
X4 Price
: $63.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Beginner Training Tutorial X4 |
This book provides a comprehensive step by step approach to learning Mastercam. It contains pages of projects, helpful hints.The book covers six mill part projects, two lathe projects, three solid projects and an additional 17 exercises. Each tutorial walks you through all the procedures from Geometry Creation to Toolpath instructions, Verification and G?Code Generation.
|
$60.00 |
| ProBookShelf Mastercam
X4 Price
: $58.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Router Training Tutorial X4 |
This book provides a comprehensive step-by-step approach to learning all levels of Mastercam Router. It includes 9 tutorials that cover 2D Geometry, Drilling, Contouring, Pocketing, Nesting, importing bitmaps using Raster to Vector and tips on modifying the resulting geometry. Instructions on proper Stock Setup, Tool Settings, creating profile bits and using the metric system are provided as well as various other helpful hints. Each tutorial is complete with instructions from Geometry Creation to Toolpath instructions, Verification and G-Code Generation.
|
$60.00 |
| ProBookShelf Mastercam
X4 Price
: $58.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Design Training Tutorial X4 |
The Mastercam X4 Design Training Tutorial provides a comprehensive step-by-step approach to learning Mastercam Design. It contains over 540 pages of projects and helpful hints. The book's 18 tutorials now feature step previews, making it easier than ever to follow. Each tutorial walks through all the procedures required for each part's geometry creation. Additionally, 26 practice exercises are provided.
|
$40.00 |
| ProBookShelf Mastercam
X4 Price
: $38.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam 4/5 Axis Training Tutorial X4 |
These training tutorials are intended for the advanced Mastercam user. There are 10 sample projects, plus general notes on 4/5 Axis Milling. Topics covered are 3D Geometry Creation, Axis Substitution, Rotary Axis Positioning, 5 Axis Drilling, Rotary 4-Axis, Swarf 5-Axis, Flow 5-Axis Toolpaths, Curve 5-Axis, Msurf 5-Axis and Port 5-Axis. These comprehensive notes also include information on Rolldie C-Hooks.
|
$90.00 |
| ProBookShelf Mastercam
X4 Price
: $87.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Advanced Multiaxis Training Tutorial X4 |
Intended for the advanced Mastercam user, this book contains projects demonstrating various Advanced Multiaxis milling applications. The first tutorials introduce the reader to the simplified user interface featuring application derived toolpaths and later transitions to the more advanced interface. Topics covered include Projection and Port machining applications, Advanced Multiaxis Swarf & Pencil toolpaths, Advanced Multiaxis Surface Roughing & Finishing toolpaths and several Gouge Check Strategies. .
|
$80.00 |
| ProBookShelf Mastercam
X4 Price
: $77.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Art Training Tutorial X4 |
This tutorial is a comprehensive step-by-step approach to learning Mastercam Art. There are six part projects that demonstrate how to create intricate 3D sculpted images from simple 2D artwork. Each tutorial walks through Geometry Creation to Toolpath instructions, Verification and G-Code generation. Instructions are also provided for importing a scanned bitmap, clip art or a CAD file and converting it into machinable geometry.
|
$35.00 |
| ProBookShelf Mastercam
X4 Price
: $33.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Project Workbook X4 |
Ideal for High School students yet practical for hobbyists, the Project workbook provides a great approach to learning Mastercam for those who prefer project-based learning. Eleven projects - some consisting of multiple parts - are provided with step-by-step instructions, helpful hints, basic machining and CAD/CAM overviews
|
$60.00 |
| ProBookShelf Mastercam
X4 Price
: $58.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Indexing Training Tutorial X4 |
This book uses a variety of projects to describe the use of the View Manager for working with Cplanes and work offsets. It contains useful information for defining and working with different standard and non-standard planes and takes a look at using Mastercam's Transform Toolpaths in a multiple fixture environment. The last project covers Cplanes and work offset settings for a chuck indexing. Each tutorial guides you through Geometry Creation, Toolpathing, Verification and G-Code generation.
|
$35.00 |
| ProBookShelf Mastercam
X4 Price
: $33.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam for Solidworks Training Tutorial X4 |
This book provides a comprehensive step-by-step approach to learning Mastercam in SolidWorks. It demonstrates how to create solids in SolidWorks and contains useful information on how to prepare the part for machining on a Vertical CNC machining center using both SolidWorks commands and Mastercam WCS. Explanations are given for the use of a proper Stock Setup and Tool Settings. Each project is either machined with Feature Based machining or Surface High Speed Toolpaths. The tutorials walk you through Geometry Creation to Toolpath instructions, Verification and G-Code generation.
|
$40.00 |
| ProBookShelf Mastercam
X4 Price
: $38.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Professional Courseware Router X4 |
Mastercam Router Professional Courseware offers an in-depth look at Mastercam 2D geometry and 2D toolpaths for router applications. Training exercises and drawings covering 2D geometry functionality are provided for the trainee to learn and practice. Additional Mastercam files are also provided along with guidelines for creating the toolpaths to machine each part. Advanced features such as nesting, block drilling, and machining with aggregates are also covered
|
$60.00 |
| ProBookShelf Mastercam
X4 Price
: $58.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Professional Courseware 4/5 Axis Mill X4 |
Mastercam Mill 4/5 Axis Professional Courseware covers the multitude of toolpaths that allow the trainee to machine 4-axis and 5-axis parts. Specific exercises are provided along with instructions on how to define the toolpath geometry, the tool axis orientation and the tip control. Advanced multi-axis toolpaths and how to use them for more complex parts are also taught in this book
|
$70.00 |
| ProBookShelf Mastercam
X4 Price
: $68.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Handbook Volume 1 X4 |
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
|
$98.00 |
| ProBookShelf Mastercam
X4 Price
: $95.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Handbook Volume 2 X4 |
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
|
$98.00 |
| ProBookShelf Mastercam
X4 Price
: $95.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Handbook Volume 3 X4 |
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
|
$98.00 |
| ProBookShelf Mastercam
X4 Price
: $95.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Instructor Kit X4 |
Instructor Kit Includes:
- Enhanced Instructor Guides for Mill Level 1 & Level 3
- Mastercam Mill Level 1 & Level 3 Training Tutorials
- PowerPoint Presentations
- 39 Lesson Outlines
- Assignments, Quizzes & Tests
- Geometry exercises & practice part drawings
- Mastercam X4 Demo CDs
|
$195.00 |
| ProBookShelf Mastercam
X4 Price
: $190.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Mastercam Instructor Kit With Lathe X4 |
Instructor Kit Includes:
- Newly developed Lathe Instructor Guide as well as Mill Level 1 & Level 3
- Set of Mill Level 1, Level 3 and Lathe Training Tutorials
- 51 Lesson plans outlining over 85 hours of content
- 46 PowerPoint presentations and Multimedia Training CDs for each application
- Quizzes, geometry exercises, practice drawings, geometry files and tests
|
$225.00 |
| ProBookShelf Mastercam
X4 Price
: $220.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| METRIC - Mastercam Mill Level 1 Metric Training Tutorial X4 |
Now available in metric, the Mastercam X4 Mill Level 1 Training Tutorial puts a greater emphasis on the machinability of parts by offering suggested fixtures, setup sheets, recommended tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 10 included tutorials. Additionally, 17 practice exercises and a General Notes chapter provide useful tools, shortcuts and 2D toolpath parameter descriptions that round out this 700+ page book
|
$65.00 |
| ProBookShelf Mastercam
X4 Price
: $63.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| Multimedia Bundle X4 |
The Mastercam X4 Multimedia Bundle contains four CDs: Mill Level 1 Training CD, Mill Level 3 Training CD, Lathe Training CD and the new Mastercam X4 Demo / Home Learning Edition. The new Demo software now allows the user to save their work.
|
$75.00 |
| ProBookShelf Mastercam
X4 Price
: $73.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| METRIC - Mastercam Mill Level 3 Metric Training Tutorial X4 |
Now available in metric, the Mastercam X4 Mill Level 3 Training Tutorial now puts more emphasis on the machinability of example parts by offering suggested fixtures, tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 8 included tutorials. Additionally, 8 practice exercises and a General Notes chapter provide useful tools, shortcuts and 3D toolpath parameter descriptions that round out this 550+ page book.
Topics covered include 3D wireframe and surface geometry creation, Surface Finish and Roughing toolpaths, advanced Surface High Speed toolpaths, advanced Toolpath Refinement, C-Hooks, STL Stock creation and its use in solid model verification.
|
$55.00 |
| ProBookShelf Mastercam
X4 Price
: $53.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| METRIC - Mastercam Lathe Metric Training Tutorial X4 |
Now available in metric, the Mastercam X4 Lathe Training Tutorial consists of 7 part-oriented tutorials and 14 practice exercises. Topics covered include 2D toolpaths such as Face, Rough, Finish, Drilling, Inside Boring, Cutoff, Threads and Canned Cycles for Rough and Finish. It also covers 3D geometry creation and C-Axis toolpaths such as Face, Cross Contouring, C-Axis Drilling and C-Axis Contouring.
|
$40.00 |
| ProBookShelf Mastercam
X4 Price
: $38.00 |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| METRIC - Mastercam 4/5 Axis Metric Training Tutorial X4 |
Now available in metric, the Mastercam X4 Metric Training Tutorial is intended for the advanced Mastercam user. There are 10 sample projects, plus general notes on 4/5 Axis Milling. Topics covered are 3D Geometry Creation, Axis Substitution, Rotary Axis Positioning, 5 Axis Drilling, Rotary 4-Axis, Swarf 5-Axis, Flow 5-Axis Toolpaths, Curve 5-Axis, Msurf 5-Axis and Port 5-Axis. These comprehensive notes also include information on Rolldie C-Hooks.
|
$90.00 |
| ProBookShelf Mastercam
X4 Price
: $87.00 |
|
|
|
|
|
| |
|
|
|
|
|
